Regulating Valve,Control valves,Plug,Ball Valve,Mono - flange,DBB Valve | Regulating Valve,Control valves,Plug,Ball Valve,Mono - flange,DBB Valve,ESD Valve,Pneumatic,Actuator,Pressure Relief valves,Wafer Check Valves,Self-Regulating Valves,Globe Valve,Needle Valve,Check Valve,Electrical Actuated on-off Valve,Pneumatic Actuated On-Off Valve,Pressure safety valves,Manifold valve,Butterfly Valves,Gate Valve

Discover how control valves are used to maintain operating conditions such as flow, pressure, temperature, and liquid level.

Regulating valves are used in refrigeration systems to maintain pressures.

Plug valve is a Quarter-turn rotary motion Valve that uses a tapered or cylindrical plug to stop or start the flow.

A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it.

Applications of the monoflange · Shut-off and venting of pressure measuring instruments.

The Double Block and Bleed Valve or a DBBV can perform the tasks of 3 separate Valves

The Emergency Shutdown Valve, ESDV acts as a safeguard against exceeding setpoint pressure.

Pneumatics is the technology of compressed air, but in some circles, it is more fashionable to refer to it as a type of automation control.

An actuator is a part of a device or machine that helps it to achieve physical movements by converting energy

A pressure Relief Valve is a safety device designed to protect a pressurized vessel or system during an overpressure event.

Wafer check valves use a swinging disc to allow or block flow.

A self-regulated valve adjust the flow using the fluid flow pressure in the pipe.

A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline.

A needle valve is a type of valve with a small port and a threaded, needle-shaped plunger.

A check valve is a device that only allows the flow of fluids in one direction.

Electric actuators can be sized and fitted to ball or butterfly valves to suit any individual requirements.

Pneumatic actuators use the pressure of compressed air to generate the torque required to turn a valve.

The function of the Safety Valve is to protect life and property against failure to control system pressures.

Manifold facilitates two or more valves along with a vent for releasing pressure.

A butterfly valve is fully open or closed when the disc is rotated a quarter turn.

A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid.